CMC
Pro Series Rescue Harness
The unique contoured padding pattern and breathable material
on the waist and leg padding provides a snug, comfortable fit while allowing
more air circulation. The front lift design increases sitting comfort and the
Web-Keepers secure loose ends of the web coming out of the buckles. Quick-fit
buckles on the legs make donning the harness easy and quick. The 1-3/4 inch web
used for the adjusting straps wraps completely around for incredible strength.
Unique construction of our new padding protects the stitching from abrasion
where the padding contacts the body. What has stayed the same is the quality
construction of the ProSeries line, still made at our
factory in
CMC Pro Series Rescue
Harness |
Catalog # |
Size |
Waist |
Weight |
202172 |
Small |
26”-30”(66-76cm) |
4 lbs, 4 oz |
202174 |
Regular |
30”-44”(76-112cm) |
4 lbs, 4 oz |
202175 |
X-Large |
42”-46”(107-122cm) |
4 lbs, 4 oz |
CMC
Pro Series Chest Harness
CMC Pro Series
Chest Harness |
A Chest Harness that attaches to the Pro Series Rescue Harness. The front strap effectively transfers the weight to the waist D-ring, maintaining nearly the same level of comfort that the Pro Series harnesses are known for. Front, sides and back are padded to maximize comfort when lifting from the oversized back D-ring. Color: black (red colored padding is available by special order). Weight 3 lbs, 5oz.
Catalog #202353 CMC Pro Series Chest Harness
CMC
Pro Series Spreader Bar
CMC Spreader
Bar |
The CMC Pro Series Spreader Bar gives you more working room in situations with low ceiling clearance. Adjustment buckles at the shoulder allow the wearer to balance the lifting for the most comfort. The spreader bar uses anodized aluminum plate, CMC Pro Series webbing and U.S. Forgecraft Buckles. The improved design integrates the height adjustment into the spreader bar for easier adjustment. Color: blue with black webbing. Weight 1.8 lbs.(.8kg).
Catalog #202200 CMC Pro Series Spreader Bar
Pro Series Full Body Harness
ProSeries SRT Harness
Designed in cooperation with a large Southern California
The harness includes a front waist D-ring for rappels and a rear waist D-Ring for travel restraint inside a helicopter. The harness is manufactured using polyester web to minimize strength loss when wet and to allow for quicker drying. Stainless steel and vinyl coated hardware reduces corrosion from frequent exposure to water.
Catalog #202872 Small/Medium 28-34 in. (68-86cm) 5 lbs
Catalog #202874 Large/X-Large 34-46 in. (86-117cm) 5 lbs
Pro Series Lifesaver Victim Harness
This harness attaches quickly and securely no matter how or where the victim is positioned. Colored web makes using the harness even easier. CMC’s original V-Ring and snap design allows the harness to be put on without the victim having to step into the harness. Tie-in point also doubles as a “handle” for controlling the victim’s position. One size fits small children to large adults. Storage bag allows easy carry, ready for use, preventing tangling when accessing the victim, and is attached to the harness so it cannot be lost. Harness now includes a wider 2 inch Velcro Web Keeper to secure webbing before deployment. Weighs 3 lbs. UL Classified to NFPA 1983.
CMC
Rescue Pro Pocket
CMC Rescue
Pro Pocket |
Hang the Pro Pocket from your rescue harness to store
runners, safety scissors, gloves and other equipment. The main bag is large
enough to fit your hand inside and can be used to store bulky items. The front
pocket is the place to keep things you do not want in your pants pocket, but do
not want to drop either, like your keys or pager. The small front pocket will
hold your scissors or safety knife. The carabiner
loops allow you to clip off runners to the outside of the bag or to put a
safety tether on any tools you might be using. Two webbing straps wrap around
your harness and adjust through a plastic keeper allowing a tight, stable fit
for most harnesses. Made of 1000 denier Cordura nylon. Color: black. Size: 6” x
4” x 11”(15x10x28cm). Made in
Catalog #434105 CMC Rescue Pro Pocket
CMC
Pro Series Confined Space Rescue Harness
More than ever, the very popular CMC ProSeries Confined Space Rescue Harness is the all-around choice for confined space operations, heavy rescue and USAR incidents. the multiple attachment points include an ANSI rated fall arrest point, shoulder lift points, and a front waist D-ring for comfortable rappels. The vest, that keeps the shoulder straps organized to make donning the harness easy, is now made of a new blue mesh with improved breathability. A new hand grip has been added to the back for assisting the wearer out of tight spaces. The harness has a radio pocket and a multi-tool or cell phone pocket. The zippered accessory pocket is ideal for a small gas monitor. Based on the CMC ProSeries design, this harness is exceptionally comfortable, even when used for a shoulder lift. The molded waist padding with the lumbar support and the breathable D3 cloth provide industry leading comfort. The redesigned buckle system and unique CMC Web Keepers provide ease of adjustment while keeping the padding in place. New one-piece design weighs only 6.5 lbs. (2.9kg).
CMC Confined Space Rescue
Harness |
Catalog # |
Size |
Waist |
Weight |
202162 |
Small |
26”-32”(66-82cm) |
6.5 lbs (2.9kg) |
202164 |
Regular |
32”-42”(82-107cm) |
6.5 lbs.(2.9kg) |
202165 |
X-Large |
42”-48”(107-122cm) |
6.5 lbs.(2.9kg) |
CMC
Rescue Utility Harness
CMC Rescue Utility Harness |
Built to meet the physical and
testing specifications required by NFPA Standard 1983 (1990 Edition). Made from
1.75”(4.5cm) webbing with a 9000 lb.(4090kg) test strength. Front D ring
attachment point. Universal adjustable fit. An excellent choice for the engine
or truck company’s rope kit. Color: black. Weight 2 lbs.(.9kg).
Made in
Catalog #202306 CMC Rescue Utility Harness
CMC
Lifesaver Victim Harness |
Pro Series Lifesaver™ Victim Harness
Designed by Rick Homan of the
Montrose SAR Team and field tested by several
Catalog #202403 Lifesaver™ Victim Harness
Other CMC products are available. Please call or write for a prompt quotation.
Roco
Rescue Plus Series Seat & Chest Harness
Roco Seat & Chest Harness |
The #R112 is a heavy-duty, Class II padded seat harness for
the industrial rescuer. Constructed primarily of 2 inch(5cm) black flat
webbing, the seat is fully adjustable, and the leg loops are made of 3
inch(7.6cm) webbing for comfort. Has large D-ring for front attachment, and
sewn webbing loop in the back for hanging gear and trailing lines. Mil-spec
hardware. The #R113 is the companion chest harness which mates with the #R112
with a simple two-point connection, creating a Class III full body harness, now
widely used for confined space rescue work. The Roco
Seat & Chest Harnesses have been UL tested and meet all requirements of
NFPA 1983-1990, and are so labeled. D-rings rated at 5000 lbs.(2268kg). 2”(5cm)
flat webbing rated at 9500 lbs.(4309kg). Total tensile strength is 5000
lbs.(2268kg). Back-up safety loop rated at over 6000 lbs.(2722kg) Made in
Catalog # |
Description |
Size |
Measurement |
Weight |
R112 |
Seat Harness |
Standard Large |
Waist: 30”-44”(77-113cm) Waist: 42”-48”(108-123cm) |
3.5 lbs.(1.6kg) |
R113 |
Chest Harness |
Standard Large |
Chest: 30”-48”(77-123cm) Chest: 44”-52”(113-133cm) |
3.1 lbs.(1.4kg) |