Water/Ice Rescue Equipment

Prices and Availability of All Items Are Subject to Change Without Notice

*Please note*

Our prices for all Water/Ice Rescue Equipment are currently being updated. Please call for current pricing.

We inspect, pressure test, and service any brand ice rescue suits and diving suits.

Wrist and neck seals as well as boots can be replaced on diving suits.

Please call 508-366-7496 or email hawills@hawills.com before sending in suits.

---

STEARNS

---

NEW!!! STEARNS I596

New Burpgrip!" handle makes it easier to release the air in the suit, and the Invisivalve!" allows for continuous purging of the air ensuring that you get the maximum performance of the suit while being able to focus solely on the rescue.

• Universal size- 6 6 height
• Enables maximum flexibility
• Used for ice and cold water rescue
• Built-in chest harness
• Welded nylon shell with removable foam liner
• Standard orange color
• Conventional neoprene suit
• Additional reflective tape around the wrists for greater visibility
• Constructed of PU coated nylon

STEARNS COLD WATER/ICE RESCUE SUIT

For rescue personnel responding to emergencies in extreme cold water and ice conditions. Provides extended hypothermia protection. One-piece suit features closed-cell 100% neoprene construction for optimum buoyancy and insulation. Suits come in their own PVC-coated nylon storage bag. Hood, face seal and flap minimize water entry Waterproof zipper Integral full-finger waterproof gloves Super-tough Andura knee and elbow patches Integral nylon chest harness with stainless D-rings, front and back Retro-reflective materials, front and back Large storage thigh pocket Integral boots with hard, non-slip soles Color - International Safety Orange

Universal-Size Suit (Catalog #I595)

Height: 59" to 75" (150cm to 190cm)

Weight: 110 lbs. to 330 lbs. (50kg to 150kg)

Oversized Suit (Catalog #I595-O)

Height: 72" to 81" (183cm to 206cm)

Weight: 220 lbs. to 375 lbs. (100kg to 170kg)

Small-Size Suit (Catalog #i595-S)

Height: 58 to 68 (147cm to 173cm)

Weight: 110 lbs. to 250 lbs. (50kg to 114kg)

---

STEARNS COLD WATER SURVIVAL SUIT

The U.S. Coast Guard approved Cold Water Survival Suit meets requirements of Solas 74/83 as adopted by the International Maritime Organization (IMO) 1986 resolution. It can be quickly and easily put on in emergencies. Provides extended Hypothermia protection as tested by the University of Minnesota Hypothermia Laboratory. Features include 100% neoprene construction, face seal and flap, waterproof zipper, attached full finger gloves and retro-reflective materials. Made of the finest closed-cell neoprene, this suit features an inflatable pillow for head and shoulder support; as well as a five finger glove for greater dexterity. Each suit is immersion tested, fully inspected and comes in its own storage bag. Color: International Safety Orange. Weight: 15.5 lbs. (7 kg). Made in USA. Adult Size: Fits persons from 110 lbs. (50 kg) to 330 lbs. (150 kg) from 59" (150 cm) to 75" (191 cm) in height. Adult Over Size: Fits persons from 330 lbs. (150 kg) up. Child Size: Fits persons from 44 lbs. (20 kg) to 110 lbs. (50 kg) from 39" (100 cm) to 59" (150 cm) in height.

Survival Suit Adult (Catalog #I590-1-AD)

Survival Suit Adult Oversize (Catalog #I590-1-AO)

Survival Suit Child (Catalog #I590-1-CS)

Optional Lifting Harness (Catalog #I590-2)

Optional Ankle Take Up Straps (Catalog #I590-3)

Optional Wrist Take Up Straps (Catalog #I590-4)

---

O.S. SYSTEMS

---

**Please Note: Special Government Pricing is Available on all O.S. Systems Products. Please call for details. **

---

SIZING CHART

Drysuit Size	Neck Maximum	Chest	Waist	Hips Maximum	Weight Maximum	Height Maximum
Extra  Small	13½"	30-35"	26-28"	36	115 lb	5'2"
Small	14½"	35-38"	28-30"	38	135 lb	5'6"
Medium	15½"	38-40"	30-34"	42	160 lb	5"11"
Large	16½"	42-44"	34-38"	44	200 lb	6'1"
Extra Large	17½"	46-48"	38-42"	48	230 lb	6'3"
XX Large	18½"	50-52"	44-48"	52	260 lb	6'4"

---

SARR DIVING DRYSUIT

Materials: Tough, Military Spec high tenacity 210 denier High Count nylon in Sea Rescue Orange for high visibility.  High Count nylon contains more threads woven into each square inch of fabric. The resulting fabric has a very tightly packed weave for extraordinary abrasion and puncture resistance.  All seams are made with quadruple interlocking stitching for strength and then fusion sealed inside for water tightness. Waterproof Coating:  The 210 HC nylon is triple coated with 6-7 ounces of polyurethane on the inside of the fabric for protected waterproofing,  Two solutions coats of polyurethane are impregnated deep into the fibers of the nylon.  A high molecular density layer of polyurethane is then laminated to these solution coats for total waterproofing and for internal abrasion resistance. Testing:  Each suit is individually pressure tested  underwater Safety:  Red and orange reflector tape down arms and around wrists

---

SARR SURFACE WATER DRYSUIT (WATERPROOF/BREATHABLE)

This is the SPLASH-B-SRO-B (SPLB-SROB), the SARR Surface Water Drysuit that is both waterproof and breathable. This photo shows the SPLB-SROB with an optional relief zipper/cordura zipper cover. Color: Sea Rescue Orange (SRO) top/bottom, for high visibility. Materials: Materials: Made from a three ply laminate having a micro denier polyester exterior fabric, a Sympatex^® waterproof breathable barrier membrane and a tricot fabric inside layer. Design: All OS SYSTEMS SARR Surface Water Drysuits are designed with Freedom Cut^!" features for complete and unrestricted freedom of movement. Sidearm Panel Gussets^!" extend from the wrist all the way down the arm to the waist. The Crotch gusset extends from one ankle through the crotch and all the way down to the opposite ankle for unparalleled fit, function and freedom of movement. Reinforcing: 500 denier Cordura^!" is used for the Butt Pad (on back) and the Knee Pads, for strength and improved slip control.  Safety: Reflective Tape - (2) 1" SOLAS horizontal strips on elbow pads just above Wrist Wraps (1" Red/Orange tape optional - n/c). . Entry: Front diagonal entry, #8 diving quality, brass tooth zipper for easy and fast donning and doffing and guaranteed watertightness. Zipper Protection: Comes with Cordura Zipper Cover. Seals: Longlife Latex^!" commercial grade rubber neck and wrist seals are thicker and more durable (minimum thickness is .030"). Made in the USA. These seals are also easily replaceable. Seal specifications and replacement instructions are available by clicking on these links. Footwear: Longlife Latex^!" socks are standard.  Made in the USA, they are thicker and more durable (minimum thickness is .035 ).  Longlife Latex^!" ankle seals are a N/C option.  Easily replaceable.  OS recommends using non-attached boots or footwear for the best individual fit, the best lace up ankle support, and the best walking and traction sole.  Seal Protection: CL Neo!" Neoprene/Cordura Neck Wrap^!" w/zipper closure, Wrist Wraps^!" and Ankle Wraps^!" cover and protect seals. Seams: Seams are double stitched for strength and fusion sealed on the inside for water tightness. Team Patch: OS will sew a team patch on a new drysuit at N/C if it is provided with the order.  Testing: Each drysuit is individually tested under pressure and under water.

---

SARR SURFACE WATER DRYSUIT (WATERPROOF/NON-BREATHABLE)

This is the SPLASH-B-SRO (SPLB-SRO), the SARR Surface Water Drysuit that is waterproof but non-breathable. This drysuit is tougher and more economical than the breathable SARR Surface Water Drysuit. Color: Sea Rescue Orange (SRO) top/bottom, for high visibility. Materials: Tough, military specification high tenacity 210  denier High Count nylon, 210HC^!".  High Count nylon contains more threads woven into each square inch of fabric.  The resulting fabric has a very tightly packed weave for extraordinary abrasion and puncture resistance.  Waterproof Coating: The waterproof coating on the 210HC nylon is on the inside to protect it from the scratches and punctures that occur on the outside of the fabric. The 210HC nylon is triple coated with three ounces of polyurethane. Two solution coats of polyurethane are impregnated deep into the fibers of the nylon. A high molecular density layer of polyurethane is then laminated to these solution coats, for total waterproofing and for internal abrasion resistance. Design: All OS SYSTEMS SARR Surface Water Drysuits are designed with Freedom Cut^!" features for complete and unrestricted freedom of movement. Sidearm Panel GussetsÔ extend from the wrist all the way down the arm to the waist. The Crotch gusset extends from one ankle through the crotch and all the way down to the opposite ankle for unparalleled fit, function and freedom of movement. Reinforcing: Cordura^!" Butt Pad and Knee Pads for protection, strength and improved slip control. Safety: Reflective Tape - (2) 1" Red/Orange horizontal strips on each forearm just above Wrist Wraps (1" SOLAS tape optional - n/c). Entry: Front diagonal entry, #8 diving quality, brass tooth zipper for easy and fast donning and doffing and guaranteed watertightness. Seals: Longlife Latex^!" commercial grade rubber neck and wrist seals are thicker and more durable (minimum thickness is .030"). Made in the USA. These seals are also easily replaceable. Seal specifications and replacement instructions are available by clicking on these links. Footwear: Longlife Latex^!" socks are standard.  Made in the USA, they are thicker and more durable (minimum thickness is .035 ).  Longlife Latex^!" ankle seals are a N/C option.  Easily replaceable.  OS recommends using non-attached boots or footwear for the best individual fit, the best lace up ankle support, and the best walking and traction sole. Seal Protection:CL Neo^!" Neoprene/Cordura Wrist Wraps^!" and Ankle Wraps^!" cover and protect the seals. Extra Protection:Cordura Neck Wrap^!" w/zipper closure, and Cordura Entry Zipper Cover are available at a small extra charge. Relief Zipper: Men's style Relief Zipper w/Cordura Zipper Cover is in available as an option for a small charge. Seams: Seams are double stitched for strength and fusion sealed on the inside for water tightness. Team Patch: OS will sew a team patch on a new drysuit at N/C if it is provided with the order. Testing: Each drysuit is individually tested under pressure and under water.

---

MUSTANG SURVIVAL

---

MUSTANG ICE COMMANDER (Catalog #IC9001 02)

The Mustang Ice Commander!" is the suit of choice for Search and Rescue teams, Fire Departments, and Ice Rescue professionals.  The modular suit is completely waterproof with water tight hood, integrated gloves, and attached boots. The flotation and insulation performance of a snap in buoyancy liner allows users to immerse themselves for long periods of time in icy cold water and maintain mental and physical capabilities. Each Ice Commander has an integrated chest harness for attachment to tether lines, ice awl pockets for storage, rubber gloves, reinforced knees and non-slip rubber soles on the attached boots. As well, each suit is 45% lighter than other rescue suits as it is made in a high visibility welded nylon shell. · Water-tight Hood & Face Seal Features SOLAS reflective tape and Velcro!" patch for light attachment. · Heavy Duty Zipper Flexible full-length zipper provides a water-tight seal. · Welded Nylon Outer Shell Provides waterproofness and durability. High-performance urethane-coated nylon exterior makes cleaning and repairs easier. · Safety Harness Integral self-adjusting safety harness. · Ergonomic Ice Awl Pockets Sleeve pockets customized to attach and stow ice awls. Pockets easily secured with Velcro!" (Ice awls not included). · Detachable Inner Buoyancy Liner Constructed of closed-cell AirSoft!" foam for maximum flotation and thermal insulation. Liner can be unsnapped and removed for cleaning and in-the-field repairs. · Reinforcements Knees are reinforced and padded with 2.5 mm neoprene. Seat and elbows are reinforced with shell fabric.

Height: 59" to 79" (150cm to 200cm)

Weight: 110 lbs. to 330 lbs. (50kg to 150kg)

NEW! MUSTANG ICE COMMANDER ICE RESCUE SUIT PRO (Catalog # IC9002-02)

For more than 10 years, the Ice Commander!" has set the standard in Personal Protective Equipment (PPE) for cold water rescue. The IC9002-02 accommodates a wider range of body types while offering unmatched adjustment to suit the needs of individual rescuers. The IC9002-02 is a modular suit made of a durable urethane-coated nylon shell and a removable buoyancy liner that also provides thermal protection. Along with the integrated boots and gloves, the extended torso and covered diagonal entry zipper allow for quick donning while creating additional flexibility for the rescuer. Multi-point adjustment straps on the wrist, torso and legs and an adjustment zipper on the back of the hood create a near custom fit.  A neoprene face guard offers additional protection from icy water and can be folded out of the way when not in use. The face guard can also be pulled to purge of excess air trapped inside the suit. The suits are reinforced in high abrasion areas and feature and are 45% lighter than neoprene suits. NEW - Neoprene face guard and reduced risk of water entry and can be folded over itself and out of the way NEW - Knees are elbows are reinforced and padded with 2.5 mm neoprene that offers protection and better grip on slippery surfaces NEW -  Hood design with back zipper adjustment offers a more secure fit NEW - Fast tab for easy attachment of accessories like a knife or strobe light NEW - Covered zipper improves rescuer forward mobility Diagonal entry zipper improves rescuer range of motion Adjustment straps on torso, legs and wrist for near custom fit Zip-in liner eases removal for drying and cleaning Water-tight Hood & Face Seal with SOLAS reflective tape and Velcro!" patch for light attachment Integral self-adjusting safety harness Ergonomic sleeve pockets customized to attach and stow ice awls and can be easily secured with Velcro!" (Ice awls not included) Integrated gloves with textured palms provide abrasion resistance and superior grip

---

MUSTANG SWIMMER DRY SUIT (Catalog #MSD560)

The Mustang MSD560 is a tri-laminate nylon and butyl suit developed for surface rescue swimmers. The RSD is intended to function in extreme environments and is currently used aboard US Coast Guard Cutters as standard equipment for Surface Rescue Swimmers. Thermal performance of the MSD560, as with any dry suit, is dependent on the type and thickness of the undergarment worn. · Sewn and double sealed seams ensure watertight integrity · Lightweight and flexible · Cushioned abrasion patches on seat, knees, arms, and shoulders · Internal adjustable suspenders accommodate a range of sizes · Diagonal cross-chest waterproof main entry zipper designed for ease of entry and self-donning · Waterproof relief zipper · Sleeve-mounted exhaust valve purges traps air · Attached socks integrate with footwear or swim fans · Sizes- Universal Adult (5 5 - 6 3 , 125-250 lbs) · Color-Black · **Breathable Suit Also Available MSD565**

SURFACE OPERATIONS TACTICAL DRY SUIT (Catalog #MSD575NV)

The MSD575 NV Surface Operations Tactical Dry Suit is a low visibility tactical garment used to aid in hypothermia protection during surface operations in or on the water when worn with insulating undergarments such as Mustang s MSL351 Dry Suit Liner. The MSD575 NV is constructed of a single-layer waterproof, breathable tri-laminate GORE-TEX® fabric. The suit features Kevlar-based reinforcement fabric specially designed to resist wear during vertical fast-roping operations or operations on non-skid decks. Trim-to-fit wrist seals and Mustang s patented Closed Comfort System (CCS) neck seal coupled with integral universally-sized socks are designed to keep the wearer dry during inclement environmental conditions and surface immersions. Additional Kevlar-based fabric reinforcement and neoprene padding is strategically located in areas on the arms/elbows, seat, and lower body. The MSD575 NV is easily donned/doffed by the wearer using a diagonal watertight entry zipper across the torso and the wearer s left shoulder and includes a relief zipper. Customized fit can be achieved through adjustment of the internal suspenders to modify trunk length for improved range of motion. The Naval Expeditionary Combat Command has approved the MSD575 NV for use by personnel attached to the Riverine Group and the Maritime Expeditionary Security Groups. Features: Trim-to-fit neoprene wrist seals Closed Comfort System (CCS) adjustable neck seal is designed to allow the ideal balance between comfort for extended wear and watertight sealing for immersion in water Manufactured with a tri-laminate GORE-TEX® fabric Reinforced with a Kevlar-based fabric for vertical fastroping applications and provide extremely durable abrasion resistance when working on or around non-skid decks Universally sized waterproof, breathable socks Six elasticized cargo pockets with drainage mesh provide maximum storage capacity Immersed Clo value of 0.68 Clo Sizing Chart:

CONSTANT WEAR MIL-SPEC AVIATION DRY SUIT (Catalog #MSF750CF)

Mustang's MSF750 CF Constant Wear Aviation Drysuit provides protection from hypothermia (when worn in conjunction with an insulating thermal undergarment) and is intended for use by aircrews engaged in over-water operations. The moisture vapor permeability characteristics of the suit reduce heat stress, providing greater operational efficiency for the wearer. Features: One-piece design is fitted with high stretch, soft latex seals at the neck and wrists Waterproof moisture vapor permeable stretch socks are provided with the suit These socks are normally fitted by technicians at the unit level to ensure correct sizing Mustang can provide the MSF750 CF with socks attached A full set of pocketry eliminates the need for a conventional flight suit to be worn over the MSF750 CF Self-donning is facilitated by a unique yoke-style waterproof entry zipper The design minimizes pressure point discomfort and maximizes compatibility with other operational equipment Allows for partial doffing of the collar section when the flyers are in stand-by mode A urinary relief waterproof zipper is provided Immersed Clo 0.847 Fabric: It is constructed with a tri-laminate fabric which is a flame resistant aramid cloth, and a waterproof, but moisture vapor permeable polytetrafluoroethylene (PTEE) membrane Confirms to military specifications MIL-C-856 Sizing Chart: Available in Sage Green

CONSTANT WEAR AVIATION DRY SUIT (Catalog #MSF751CF)

Mustang's MSF751 CF Constant Wear Aviation Drysuit provides protection from hypothermia (when worn in conjunction with an insulating thermal undergarment) and is intended for use by aircrews engaged in over-water operations. The moisture vapor permeability characteristics of the suit reduce heat stress, providing greater operational efficiency for the wearer. Features: One-piece design is fitted with an adjustable latex neck seal and neoprene wrist seals Waterproof moisture vapor permeable stretch socks are provided with the suit These socks are normally fitted by technicians at the unit level to ensure correct sizing A full set of pocketry eliminates the need for a conventional flight suit to be worn over the MSF751 CF Self-donning is facilitated by a unique yoke-style waterproof entry zipper Immersed Clo 0.77 when worn with a liner Sizing Chart: Available in Sage Green and Orange

USCG BOAT CREW DRYSUIT WITH LATEX NECK SEAL (Catalog #MSD585 22)

Now authorized for use by the USCG Office of Boat Forces Rescue and Survival Systems Program Manager The MSD585 22 Boat Crew Drysuit offers enhanced protection while providing the comfort and functionality needed for marine operations. Made of lightweight waterproof, breathable GORE-TEX®, the MSD585 22 includes removable internal suspenders for a near custom fit. Fleece lined hand warmers offer relief for cold, wet hands and the adjustable storm collar protects against rain or sea spray and can be folded out of the way when not in use. Elbows, knees and seat are reinforced with 500-Denier Cordura® and reflective tape on the arms increases visibility. A large sleeve pocket and two deep cargo pockets provide easy access to equipment and a back calf pocket fits the required MA7348 neoprene survival hood (MA7348 not included). Easy-clip belt keepers stabilize duty belts and gear without the hassle of an over the shoulder harness. Tall lower leg over cuffs with long zippers allow easy donning and doffing of high cold weather boots while also increasing comfort. The USCG Boat Crew Drysuit is available with a latex trim-to-fit neck seal and neoprene wrist seals for increased comfort and durability. Features: Waterproof, breathable GORE-TEX® fabric for reduced thermal burden in high-stress operations Latex trim-to-fit neck seal Lightweight suit optimizes mobility Lined, trim-to-fit stretch neoprene wrist seals Fleece lined storm collar provides several wear configurations and folds out of the way when not in use Diagonal cross-chest waterproof entry zipper for quick donning and doffing Cushioned knees for comfort, extreme-duty abrasion patches on legs and seat Taped watertight seams Covered, waterproof zipper pulls prevent interference with other equipment Attached socks integrate with footwear or swim fins Internal Removable Suspender System (MA7650) accommodates a range of sizes Adjustable heavy-duty elastic waist band buckles in the front to gather the suit's excess fabric Sizing Chart:

CONSTANT WEAR AVIATION DRY SUIT SYSTEM (2-LAYER) (Catalog #MSF300)

The MSF300 is a two-layer Aircrew Dry Suit that combines the performance of the 3 layer MAC300 into two layers allowing greater mobility with reduced bulk and lower thermal burden. The outer shell uses a blended GORE-TEX/NOMEX® fabric that is waterproof, breathable, flame-retardant and anti-static.  High-wear areas are strategically reinforced to enhance the suit's durability and prevent abrasion damage that could compromise the suit's integrity. The breathable thermal liner provides both insulation and emergency flotation and features Mustang's aerated closed-cell foam quilted with a wicking fabric that pulls excess moisture away from the body. An adjustable neck seal using Mustang's patented Closed Comfort System (CCS!") can be worn loose to provide comfort out of the water and can quickly be drawn tight to keep the water out and trim to fit neoprene wrist seals provide watertight integrity. The thermal liner can be easily removed from the outer shell to reduce thermal protection where not operationally required. An ergonomically designed rear entry allows for self donning and doffing. Integral pockets are designed for a variety of uses and facilitate access even when wearing a survival vest over the suit. The MSF300 comes ready to wear with included universally sized dry socks, trim to fit wrist seals and CCS!" adjustable neck seal. Features: Suit comes ready to wear with included universally sized dry socks, trim to fit wrist seals and CCS adjustable neck seal 3 layers of performance combined into 2 layers offers greater mobility, reduced bulk and thermal burden When integrated with the Outer Shell, the MSF300 suit system provides a stirred (calm) water Clo value of 0.58. Sizing Chart (Double-Click to Zoom):

MUSTANG BREATHABLE IMMERSION WORKSUIT FOR SPECIAL OPERATIONS (Catalog #MSD900SO)

When operating conditions require a suit with greater durability than traditional dry suits and anti-exposure work suits, Mustang Survival offers the ultimate in cold weather Personal Protective Equipment (PPE). The MSD900 SO is a 3-layer modular system that combines the protection of an immersion suit with the mobility and durability of a work suit. The inner liner provides thermal protection and flotation using ultra soft closed cell foam which is then quilted with moisture wicking fabrics to regulate body temperature. The immersion module uses GORE-TEX® waterproof breathable fabric to allow the escape of excess moisture vapor while providing a waterproof barrier to the outside elements. The rugged outer shell protects against debris and is reinforced on the knees, seat and knees for abrasion resistance. These 3 modular layers are integrated into one unit to provide optimal protection and offer convenient repair or replacement of parts. Designed for constant wear, the MSD900 SO can be used for special operations and covert applications where extreme durability is required. Features: Provides an estimated 6 hours of survival time in 32°F water, rating an immersed Clo of 0.74 (based on a thermally insulated mannequin) 3 modular layers are integrated into one unit to provide optimal protection and offer convenient repair or replacement of parts SOLAS/IMO reflective tape provides high visibility Easy-clip belt keepers stabilize duty belts and gear Inflatable pillow adds head support and improved freeboard Fleece lined hand warmers offer relief for cold, wet hands Elbows, knees and seat are reinforced with 500-Denier Cordura® Closed Comfort System (CCS!") adjustable neck seal Adjustable neck seal - US Patent No. 6,668,386 Canadian Patent No. 2,381,720 Three Layer System: 1st Layer - Thermal Layer Using ultra-soft, polyvinylchloride (PVC) closed-cell foam, the thermal layer provides both hypothermia protection and inherent buoyancy. Quilted wicking fabric pulls moisture away from the body to ensure a dry, comfortable fit. 2nd Layer - Immersion Module The immersion module uses light weight GORE-TEX ® waterproof breathable fabric to reduce heat stress and fatigue, while maximizing thermal and immersion protection. Trim to fit neoprene wrist seals ensure waterproof integrity and Mustang's patented Closed Comfort System (CCS!") adjustable neck seal can be worn loose to provide comfort out of the water and can quickly be drawn tight to keep the water out. 3rd Layer - Outer Shell The urethane-coated nylon shell provides a durable water-resistant barrier to wind, sea spray and rain and protects the inner layers against debris. Seat and knee panels are reinforced using 500 Denier Cordura® Nylon to provide abrasion protection. Advanced Ventilation Technology (AVT!") venting design promotes heat and moisture regulation. Sizing Chart:

INDUSTRIAL IMMERSION WORK SUIT FOR USCG (Catalog #MSD901 22)

When greater durability than traditional drysuits and anti-exposure work suits are needed, Mustang Survival offers the ultimate in cold weather Personal Protective Equipment (PPE). The MSD901 22 is a 3-layer modular system that combines the protection of an immersion suit with the mobility and durability of a work suit. The inner liner provides thermal protection and flotation using ultra soft closed cell foam which is then quilted with moisture wicking fabrics to regulate body temperature. The immersion module uses GORE-TEX® waterproof breathable fabric to allow the escape of excess moisture vapor while providing a waterproof barrier to the outside elements. The rugged outer shell protects against debris and is reinforced on the knees, seat and knees for abrasion resistance. These 3 layers are integrated into one unit to provide optimal protection and offer convenient repair or replacement of parts. New features included on the MSD901 22 provide improved comfort and performance. Trim to fit neoprene wrist seals and removable internal suspenders allow users to customize the suit to their exact needs. Wide leg construction accommodates a 16" boot and makes the suit even easier to don. The included closed-cell neoprene hood provides thermal protection in extreme cold weather environments. Features: Designed for the USCG Trim to fit neoprene wrist seals for customized fit Removable internal suspenders for better fit Closed-cell neoprene hood for thermal protection Velcro for attaching badges Wide leg construction accommodates up to 16" boot Provides an estimated 6 hours of survival time in 32°F water, rating an immersed Clo of 0.74 (based on a thermally insulated mannequin) 3 modular layers are integrated into one unit to provide optimal protection and offer convenient repair or replacement of parts SOLAS/IMO reflective tape provides high visibility Inflatable pillow adds head support and improved freeboard Fleece lined hand warmers offer relief for cold, wet hands Elbows, knees and seat are reinforced with 500-Denier Cordura® Closed Comfort System (CCS!") adjustable neck seal Easy-clip belt keepers stabilize duty belts and gear Adjustable neck seal - US Patent No. 6,668,386 Canadian Patent No. 2,381,720 Three Layer System: 1st Layer - Thermal Layer Using ultra-soft, polyvinylchloride (PVC) closed-cell foam, the thermal layer provides both hypothermia protection and inherent buoyancy. Quilted wicking fabric pulls moisture away from the body to ensure a dry, comfortable fit. 2nd Layer - Immersion Module The immersion module uses light weight GORE-TEX ® waterproof breathable fabric to reduce heat stress and fatigue, while maximizing thermal and immersion protection. Trim to fit neoprene wrist seals ensure waterproof integrity and Mustang's patented Closed Comfort System (CCS!") adjustable neck seal can be worn loose to provide comfort out of the water and can quickly be drawn tight to keep the water out. 3rd Layer - Outer Shell The urethane-coated nylon shell provides a durable water-resistant barrier to wind, sea spray and rain and protects the inner layers against debris. Seat and knee panels are reinforced using 500 Denier Cordura® Nylon to provide abrasion protection. Advanced Ventilation Technology (AVT!") venting design promotes heat and moisture regulation. Sizing Chart:

BOAT CREW DRYSUIT WITH ADJUSTABLE NECK SEAL (Catalog #MSD585 AS)

The MSD585 AS Boat Crew Drysuit offers enhanced protection while providing the comfort and functionality needed for marine operations. Made of lightweight waterproof, breathable GORE-TEX®, the MSD585 AS includes internal suspenders for a near custom fit. Fleece lined hand warmers offer relief for cold, wet hands and the adjustable storm collar protects against rain or sea spray and can be folded out of the way when not in use. Elbows, knees and seat are reinforced with 500-Denier Cordura® and reflective tape on the arms increases visibility. A large sleeve pocket and two deep cargo pockets provide easy access to equipment and a back calf pocket fits a thermal hood. Easy-clip belt keepers stabilize duty belts and gear without the hassle of an over the shoulder harness. The Boat Crew Drysuit is available with Mustang's Closed Comfort System (CCS!") adjustable neck seal. Features: Waterproof, breathable GORE-TEX® fabric for reduced thermal burden in high-stress operations Closed Comfort System (CCS!") adjustable neck seal Lightweight suit optimizes mobility Lined, trim-to-fit stretch neoprene wrist seals Fleece lined storm collar provides several wear configurations and folds out of the way when not in use Diagonal cross-chest waterproof entry zipper for quick donning and doffing Cushioned knees for comfort, extreme-duty abrasion patches on legs and seat Taped watertight seams Covered, waterproof zipper pulls prevent interference with other equipment Attached socks integrate with footwear or swim fins Internal Removable Suspender System (MA7650) accommodates a range of sizes Adjustable heavy-duty elastic waist band buckles in the front to gather the suit's excess fabric Sizing Chart:

TACTICAL OPERATIONS DRYSUIT (Catalog #MSD575)

The MSD575 Tactical Operations Drysuit is specially designed for over-water and waterborne tactical operation teams that require an abrasion resistant, durable drysuit. Breathable GORE-TEX® fabric is supplemented with Kevlar® patches on arms and legs that protect against abrasion damage from fast roping. Cushioned patches on the knees and elbows add additional protection during tactical maneuvers while the integral neck pad reduces chafing and discomfort caused by tactical vests or harnesses worn during operations. An internal suspender system creates a more custom fit and reduces bulk. Mustang's patented Closed Comfort System (CCS!") adjustable neck seal can be worn loose to provide comfort out of the water and can quickly be drawn tight to keep the water out. Trim to fit neoprene wrist seals provide a comfortable, functional alternative to traditional latex seals. A diagonal waterproof entry zipper and horizontal waterproof relief zipper ensure easy entry and crew comfort during extended operations. Features: Breathable laminate and adjustable neck seal for reduced thermal burden in high-stress operations Abrasions patches on legs, arms and seat ensure integrity of the dry suit in the most demanding operational environments Adjustable neck seal and neoprene wrist seals for comfort and durability Lightweight and flexible for improved mobility Cushioned knees and elbows for comfort during tactical maneuvers Internal elastic suspender system ensures proper fit through each size range Diagonal cross-chest waterproof entry zipper for quick donning and doffing Waterproof relief zipper Sizing Chart:

WATER RESCUE DRYSUIT (Catalog #MSD575 WR)

The MSD575 WR Water Rescue Drysuit is a traditional fitting, durable dry suit designed for rescuers who face the challenge of moving water and urban flooding. The suit combines the robustness of Mustang's Tactical Operations Dry Suit, with the high visibility and padding needed in a swift water or urban search and rescue (USAR) environment. The breathable GORE-TEX is supplemented with Kevlar patches on hip, knees, arms and cuffs to provide extreme abrasion and puncture resistance against rocks and debris. The suit's internal suspender system provides an almost "custom fit" over the range of sizes, ensuring maximum mobility. Mustang's patented Closed Comfort System (CCS!") can be worn loose to provide comfort out of the water and can quickly be drawn tight to keep the water out. The adjustable seal also provides increased durability compared to traditional latex seals. The diagonal waterproof entry zipper and horizontal waterproof relief zipper ensure easy entry and crew comfort during extended operations. Thermal performance of Mustang drysuits are dependent on the type of undergarment worn. Features: Waterproof, breathable GORE-TEX® fabric for reduced thermal burden on extended missions Patented Closed Comfort System (CCS!") adjustable neck seal can be worn loose to provide comfort out of the water and can quickly be drawn tight to keep the water out Abrasion patches on legs, arms and seat ensure integrity of the drysuit in the most demanding operational environments Trim to fit neoprene wrist seals for comfort and durability Lightweight and flexible for improved mobility Cushioned knees and elbows for comfort during tactical maneuvers Internal elastic suspender system ensures proper fit through each size range Diagonal cross-chest waterproof entry zipper for quick donning and doffing Waterproof relief zipper SOLAS retro-reflective tape on arms for visibility Sizing Chart:

SURFACE RESCUE SWIMMER DRY SUIT (Catalog #MSD560)

The MSD560 is a universally sized flexible, light weight dry suit developed for use in the extreme environments faced by surface rescue swimmers. A heavy duty butyl, nylon tri-laminate suit, the MSD560 offers a full range of motion to accommodate ease in swimming and high performance duties including climbing, lifting, rescue, and salvage operations.

Padded reinforcements protect areas susceptible to excess wear and pressure during rescue missions and an exhaust valve built into the forearm of the suit allows the quick evacuation of trapped air.

Adjustable internal suspenders accommodate a range of sizes.
The MSD560 is compatible with aircrew duties in most rotary wing aircraft and has been designed to integrate with all rescue and life support equipment currently in use by military aviation rescue swimmers.

Features:

• Sewn and double sealed seams ensure watertight integrity
• Lightweight and flexible
• Cushioned abrasion patches on seat, knees, arms, and shoulders
• Internal adjustable suspenders accommodate a range of sizes
• Diagonal cross-chest waterproof main entry zipper designed for ease of entry and self donning
• Waterproof relief zipper
• Sleeve-mounted exhaust valve purges trapped air
• Attached socks integrate with footwear or swim fins

Sizing Chart:

Adult Universal

65-75 inches

185-250lbs

BREATHABLE AVIATION RESCUE SWIMMER DRYSUIT (Catalog #MSD565)

The MSD565 is a breathable dry suit co-developed with the US Navy for aviation rescue swimmer missions. Offering the highest level of operational compatibility and performance, the suit is built to perform in the most extreme environments and is compatible with aircrew duties in most aircraft. Featuring GORE-TEX waterproof, breathable fabric, the MSD565 allows a full range of motion for ease of swimming and performance of duties involving climbing, lifting, rescue, and salvage operations. The suit also features an exhaust valve in the forearm that can be used to reduce buoyancy by quickly purging excess, trapped air. This ability to discharge of excess air from the suit provides improved mobility in the water. The suit also features padded reinforcement in areas that receive high wear and pressure during rescue missions. The MSD565 incorporates internal suspenders to provide a closer fit over a range of sizes. Attached stretch fabric GORE-TEX® socks can accommodate the swim fins used by rescue swimmers. A neoprene panel is attached on the inside of the suit to cushion the wearer from the rescue harness buckle. Features: Made with a breathable laminate and SOLAS reflective tape A heavy-duty waterproof main zipper runs diagonally across the chest for ease of entry and to facilitate self-donning Sewn and double sealed seams ensure watertight integrity Lightweight and flexible Cushioned abrasion patches on seat, knees, arms, and shoulders Waterproof relief zipper Sleeve-mounted exhaust valve purges trapped air Attached socks integrate with footwear or swim fins Same as MSD560 but made with breathable laminate, the inclusion of SOLAS reflective tape, and is available in multiple sizes. Sizing Chart:

SWIFT WATER RESCUE DRYSUIT PRO (Catalog #MSD577 SR)

The MSD577 SR Water Rescue Drysuit combines the comfort needed for constant wear with the close fit essential for mobility during aggressive swimming. The suit also has the durability needed in swift water and urban search and rescue (USAR) missions. NOTE: The snug fit inherent with this design generally results in wearer's requiring one size larger than our other dry suits. This lightweight waterproof, breathable GORE-TEX® suit features stretch panels around the waist and on each shoulder to increase mobility without adding excess fabric. A pick resistant stretch pant overlay reduces bulk in the legs; abrasion resistant patches protect the waist, knees, arms and cuffs. A removable, tailbone protector and cushioned elbows and knees offer added protection. During extended missions, the top stow feature allows for ½ doffing without fear of damaging the suit and Mustang's patented Closed Comfort System (CCS!") adjustable neck seal can be worn loose to provide comfort out of the water and can quickly be drawn tight to keep the water out. Features: Improved Fit Internal 4-point adjustment system, integrated thigh straps and waist belt reduce bulk and improve fit Innovative stretch pant overlay reduces bulk and improves fit Engineered to minimize in-water drag, thereby reducing fatigue and improving rescuer safety and effectiveness Stretch panels on shoulders for better mobility and swimming ease 360 degree stretch panel on waist for optimum mobility without excess fabric Patented adjustable neck seal for comfort and universal sizing Trim-to-fit durable 3mm neoprene cuffs Optimizes agility and confidence Enhanced Comfort and Safety High performance GORE-TEX® waterproof breathable fabric Diagonal cross-chest waterproof entry zipper for quick donning and doffing Telescoping top eases donning with close fit Top stow feature allows for ½ doffing, without fear of damage, contamination or dragging sleeves Adjustable, removable tailbone protector Padded elbows Integrated articulated knee padding SOLAS retro-reflective tape on arms for visibility Durability Lower body and forearms protected by abrasion and pick-resistant protective layer Kevlar patches on waist, knees, arms and cuffs Lower body and forearms protected by abrasion and pick-resistant protective layer Diagonal cross-chest waterproof entry zipper for quick donning and doffing Sizing Chart:

---

MUSTANG OCEAN COMMANDER (Catalog #OC8000HR)

When nature turns nasty and lives need protecting the quality and performance of an immersion suit is a must. What makes the Ocean Commander superior is its exceptional flexibility. It's 45% lighter than conventional neoprene suits making it quicker and simpler to don. And the additional mobility makes it easier to execute abandonment procedures. Truly innovative in both concept and design, the Ocean Commander is unrivaled for mobility, comfort and protection. · Hood and face seal, provides protection from water and wind exposure · Detachable mitts with snug wrist seals · Water tight zipper and seams · Welded nylon outer shell · Detachable inner buoyancy liner · Safety features: S.O.L.A.S. grade reflective tape, hailing whistle and buddy line · USCG and S.O.L.A.S Approved · Adjustable ankle straps · Neoprene wrist seals · Durable non-slip rubber soles · Compact storage case · Color - Orange

Height: 59" to 79" (150cm to 200cm)

Weight: 110 lbs. To 330 lbs. (50kg to 150kg)

---

SURVITEC SURVIVAL PRODUCTS IMPERIAL ICE RESCUE SUIT(Catalog #80-1500-UNIV)

IMPERIAL ICE RESCUE SUIT Features: · Breathable shell fabric · Drysuit mobility, look, and feel · Easy to repair fabric, even seams · Cordura reinforced wear areas · Replacement inner foam liner · Internal suspenders for more comfort · Heavy-duty waterproof zipper · 3-Ply chemical resistant insulated gloves · Universal Sizing · Purge Valve · Attached booties · AWL pocket · Pull harness · Wrist, thigh and ankle adjustments · SOLAS reflective on arms, head, and torso

---

SWITLIK U-ZIP-IT ANTI-EXPOSURE BREATHABLE DRY SUIT(Catalog #s-3320)

Anti-Exposure Breathable Dry Suit Features: Unique U-ZIP-IT low slung entry zipper design provides ease of doning, unassisted zipper closure, enhanced comfort, and freedom of movement Articulated knee, seat and elbow chafe patches are constructed of highly abrasion resistant, heavy duty Nomex/Kevlar ripstop fabric Flame resistant shawl collar protects the neck seal while an internal Nomex neck guard provides added comfort Internal suspender system allows the suit to move with the body without sagging or binding Available in a full range of sizes Unisex relief zipper Optional removable foam knee pads for flight crew operations Flame resistant wrist seal over-cuffs Convenient large capacity sleeve and thigh pockets Comfortable CWU-75P stretch PTFE breathable laminate socks installed Rescue Orange three layer PTFE breathable laminate/Nomex fabric. Sage Green or Black available by special order.

THE HAWILL'S WEB CATALOG